Difference between revisions of "Outline for a Technological Process Node"

From StemNode Lit Reviews
m
 
(30 intermediate revisions by the same user not shown)
Line 8: Line 8:
  
 
'''This system is also called:'''
 
'''This system is also called:'''
 +
'''Keywords:'''
 +
 +
=Significance=
 +
<!--Relay any broader impact.  Typically for generalized systems (systems that do not have a specific make and model)-->
  
 
=Principles of Operation=
 
=Principles of Operation=
Line 15: Line 19:
 
<!-- Make each mode a subheader if additional information is presented on the mode.  Many generalized systems are operated in different modes; for example a tractor can be operated in tiller, backhoe, fork lift, mower, or shovel loader modes. This section helps reduce the need for replicating system pages when it is used under different situations.-->
 
<!-- Make each mode a subheader if additional information is presented on the mode.  Many generalized systems are operated in different modes; for example a tractor can be operated in tiller, backhoe, fork lift, mower, or shovel loader modes. This section helps reduce the need for replicating system pages when it is used under different situations.-->
  
−
==Operating Requirements and Conditions==
+
==Operating Specifications==
−
<!-- Only briefly state anything that the StemNode Diagrams can cover as inputs. Use metric base units (Kg, L, m, A, cd, mol) where practical, with the exception of temperature which should be in Celsius instead of Kelvin. Chemical and biochemical processes should be in molar ratios.-->
+
===Operating Parameters and Limitations===
 +
<!-- Typically used for specific systems (ones that have a make and model) -->
 +
 
  
 
{| class="wikitable sortable"
 
{| class="wikitable sortable"
 
|-
 
|-
−
! rowspan ="2"|Condition
+
! rowspan ="2"|Parameter
 
! colspan = "3"|Optimum
 
! colspan = "3"|Optimum
 
! rowspan ="2"|Operating Range
 
! rowspan ="2"|Operating Range
 
! rowspan ="2"|Units
 
! rowspan ="2"|Units
−
! rowspan ="2"|Notes
+
! rowspan ="2"|Effect on Outputs
 
|-
 
|-
 
!(e.g. Mode 1) !! (e.g Mode 2) !! (e.g. Mode 3)
 
!(e.g. Mode 1) !! (e.g Mode 2) !! (e.g. Mode 3)
Line 43: Line 49:
 
|}
 
|}
  
−
==Ratios of Inputs to Outputs==
+
===Requirements for Operation===
 +
<!-- Only briefly state anything that the StemNode Diagrams can cover as inputs. Use metric base units (Kg, L, m, A, cd, mol) where practical, with the exception of temperature which should be in Celsius instead of Kelvin. Chemical and biochemical processes should be in molar ratios.-->
 +
 
 +
===Correlation of Inputs to Outputs===
 
<!--Use metric base units (Kg, L, m, A, cd, mol) where practical, with the exception of temperature which should be in Celsius instead of Kelvin. Chemical and biochemical processes should be in molar ratios. Alternate units can be placed in parentheses -->
 
<!--Use metric base units (Kg, L, m, A, cd, mol) where practical, with the exception of temperature which should be in Celsius instead of Kelvin. Chemical and biochemical processes should be in molar ratios. Alternate units can be placed in parentheses -->
  
−
==Mathematic Models==
+
==Mathematical Models==
 
<!-- Alternatively "Mathematical Models". Link to code sets, MatLab models ect. hosted on external websites.  Use [http://www.example.com link title], and replace "link title" with the desired text to appear -->
 
<!-- Alternatively "Mathematical Models". Link to code sets, MatLab models ect. hosted on external websites.  Use [http://www.example.com link title], and replace "link title" with the desired text to appear -->
 +
 +
=Diagrams=
 +
<!--Insert images or link to CAD, PDF, image and vector files, or other visual models that host the files. This section is often only useful for specific systems (manuals on a specific make and model). Use [http://www.example.com link title], and replace "link title" with the desired text to appear -->
 +
 +
 +
=Commissioning=
 +
 +
 +
=Best Practices=
  
 
=Maintenance and Repair=
 
=Maintenance and Repair=
−
 
+
==Monitoring==
 
==Maintenance Schedule==
 
==Maintenance Schedule==
 
<!--This section is for expected maintenance. Repairs of unexpected problems should go under the "Typical Failures and Known Solutions" section. Cost data should be omitted since it will change over time-->  
 
<!--This section is for expected maintenance. Repairs of unexpected problems should go under the "Typical Failures and Known Solutions" section. Cost data should be omitted since it will change over time-->  
Line 88: Line 106:
 
|}
 
|}
  
−
==Warranty==
+
==Warranties==
 
<!--This only applies to specific systems (manuals on a specific make, model, or serial number).  Delete section for generalized systems -->
 
<!--This only applies to specific systems (manuals on a specific make, model, or serial number).  Delete section for generalized systems -->
 +
 +
=End of Life=
  
 
=System Variations=
 
=System Variations=
−
<!--Discuss Variations or modification on the System -->
+
<!--Discuss Variations, Modifications, or hacks on the System -->
  
 +
==Upgrades, Modifications, Hacks==
  
−
==Instances of the System==
+
==Systems Instances==
 
<!--This only applies to generalized systems (those that do not have a make, model, or serial number) that have specific systems within them.  Delete section for specific systems -->
 
<!--This only applies to generalized systems (those that do not have a make, model, or serial number) that have specific systems within them.  Delete section for specific systems -->
  
Line 114: Line 135:
 
|}
 
|}
  
−
=Cultural Significance=
+
{| class="wikitable sortable"
 +
|-
 +
! Location
 +
! Date Installed
 +
! Owner/Operator
 +
|-
 +
|
 +
|
 +
|
 +
|}
 +
 
 +
==Case Studies==
 +
 
 +
==Versions of the System==
 +
<!--This only applies to specialized systems (those that have a make, model that have specific systems within them.  Delete section for specific systems -->
 +
 
 +
{| class="wikitable sortable"
 +
|-
 +
! Version
 +
! Dates of Production
 +
! End of Production
 +
! Number Produced
 +
 
 +
|-
 +
| (Insert Version)
 +
| (State a Date)
 +
| (State a Date)
 +
| (State a unitless quantity)
 +
|}
 +
 
 +
=Safety=
 +
<!--Personal protective equipment, or operating requirements -->
 +
 
 +
=Cultural Considerations=
 
<!--An opportunity to give credit to entire cultures when an individual cannot be credited, and/or relay ethnological significance -->
 
<!--An opportunity to give credit to entire cultures when an individual cannot be credited, and/or relay ethnological significance -->
−
 
−
=Virtual Models=
 
−
<!--Link to CAD drawings (*.dxw, *.skp, ), PDFs ect on external websites that host the files. This section is often only useful for specific systems (manuals on a specific make and model). Use [http://www.example.com link title], and replace "link title" with the desired text to appear -->
 
  
 
=Intellectual Property=
 
=Intellectual Property=
 
<!-- List any relevant patents, copyrights, or trade secrets on the system -->
 
<!-- List any relevant patents, copyrights, or trade secrets on the system -->
  
−
=Regulations=
+
=Policies=
 
<!-- Subsections should be organized in alphabetical order by country, then state, where the regulations apply -->
 
<!-- Subsections should be organized in alphabetical order by country, then state, where the regulations apply -->
 +
 +
=Cost Data=
 +
 +
=Manufacturer Information=

Latest revision as of 02:10, 29 December 2018

The goal of this outline is to standardize the communication of scientific and technical information. Try to follow the spirit of the outline but delete irrelevant sections and alter as needed. If information for a section is not available at the time of page creation, but the section is still relevant, keep the section to indicate the opportunity to contribute to others. Additional guidance is provided in comments that only appear in the source code.

Click "Edit Source" above, then copy and paste the text below the dotted line to start a page for a process node.

Authors:

This system is also called: Keywords:

Significance

Principles of Operation

Modes of Operation

Operating Specifications

Operating Parameters and Limitations

Parameter Optimum Operating Range Units Effect on Outputs
(e.g. Mode 1) (e.g Mode 2) (e.g. Mode 3)
(e.g. Temperature) (Mode 1 Optimum) (Mode 2 Optimum) (Mode 3 Optimum) (e.g. 40-70) (e.g °C) (notes)
(e.g. pH) (e.g. 7) (e.g. 6.5-8.5) - (notes)

Requirements for Operation

Correlation of Inputs to Outputs

Mathematical Models

Diagrams

Commissioning

Best Practices

Maintenance and Repair

Monitoring

Maintenance Schedule

Frequency Action Who Performs? Time to Complete
(state the frequency) (state the action) (User, Professional, Manufacturer, Anyone) (Number and unit of time)

Known Failures and Solutions

Problem Symptom (s) Fundamental Cause Solution
A goal the user cannot achieve Usually a measurable or observable attribute Connect to a more fundamental principle Action that can be taken

Warranties

End of Life

System Variations

Upgrades, Modifications, Hacks

Systems Instances

Make Model Dates of Production End of Production Number Produced
(Insert Company) (Insert Model) (State a Date) (State a Date) (State a unitless quantity)
Location Date Installed Owner/Operator

Case Studies

Versions of the System

Version Dates of Production End of Production Number Produced
(Insert Version) (State a Date) (State a Date) (State a unitless quantity)

Safety

Cultural Considerations

Intellectual Property

Policies

Cost Data

Manufacturer Information

Retrieved from "https://wiki.stemnode.org/index.php?title=Outline_for_a_Technological_Process_Node&oldid=612"
Powered by MediaWiki